Field notes·

How many lane-miles can one rating crew survey before budget season?

A rural two-lane highway stretching to the horizon, lined with telephone poles and open fields.

Every pavement management office runs this math at some point in the fall. Budget season opens in six, eight, maybe ten weeks. The network office has 1,800 centerline miles. One truck, one rater, and a laptop running your PMS software.

A single rating crew clears maybe 700 lane-miles in a good month. Most networks run well past that before the truck's even covered a quarter of them.

What a rating crew covers in a day

Windshield surveys rated to something like ASTM D6433 or a state PASER-style protocol move slower than people outside the office expect. A two-person crew doing visual condition rating at driving speed, stopping to log distress type and severity by segment, typically gets through somewhere in the range of 20 to 50 lane-miles a day. Urban arterials with signals, driveways, and stop-and-go traffic sit at the low end. Rural two-lane with long uniform segments sits at the high end.

Run that against a mid-size county or city network and the arithmetic gets uncomfortable fast. At 35 lane-miles a day, five days a week, one crew clears maybe 700 lane-miles a month, if nothing interrupts it. Weather interrupts it. Equipment interrupts it. A rater who's new to the segment coding scheme interrupts it, because consistency between raters is its own problem nobody budgets time for.

So most agencies don't rate the whole network every year. They rate what the schedule allows, roll the rest forward from last year's numbers or a windshield pass done by whoever was available, and call it current enough. The resurfacing list that comes out of budget season reflects whichever routes got driven this cycle more than the network as it sits today.

Why rating crew capacity drives your resurfacing list

This is the part that doesn't show up in the PMS dashboard. The ranked list you bring to the budget meeting reflects rating crew throughput as much as it reflects pavement condition. A corridor that got skipped two cycles running because it's low-volume and out of the way can be deteriorating quietly while a well-traveled arterial gets rated every single year because it's on the way to the yard.

Ask the question plainly: if your crew can survey 700 lane-miles a month and your network is 2,500 lane-miles, when was the last segment on the far side of the county actually looked at, and by whom?

Manual rating throughput is a real constraint, built into how the work gets done. A rater walking or driving a segment, classifying cracking severity, logging patching extent, and keying it into the PMS takes the time it takes. That pace caps how much of the network gets covered before the budget deadline forces a decision. The list that goes in front of the board is a sample of the network, not a full count, and it rarely gets labeled that way.

An annual VHR pass, satellite or aerial at 0.3 m resolution or finer, reads cracking, ravelling, and patching concentrations across the whole network in one cycle, not whatever a crew managed to drive before the deadline. That's the gap Road Surface Condition is built to close: a network-wide condition picture and a ranked list to prioritize, built from the full network instead of this year's drive route.

If your resurfacing list has been shaped by crew capacity more than by actual condition, it's worth seeing what the same network looks like from a full annual pass instead.

Action requested

If your paving list is due before the next windshield survey can finish, tell us about the network.

Start a pilot

← All field notes